Summary:The Importance of Road Lighting
In addition to illuminance, road lighting is important for safety. Different road users have different need...
The Importance of Road Lighting
In addition to illuminance, road lighting is important for safety. Different road users have different needs, and the level of illumination must meet those needs. The illuminance level for a street light should be chosen based on the location of the road user, his/her speed, and the shape of the road. Luminance levels should be designed for cyclists and pedestrians, as well as for pedestrians and bicycles.
In addition to increased safety, proper road lighting can reduce the number of accidents, especially at night. By improving visibility, road users will be less likely to make mistakes and overestimate their own abilities. In addition, the proper lighting levels will reduce the risk of accidents and injuries. Research has shown that the amount of light needed depends on a number of key factors, including the type of road, the surrounding environment, and the speed limit.
Road lighting should be installed in strategic locations to provide a heightened level of safety for road users. It should highlight traffic signs and provide maximum uniformity of illumination of the pavement. The height of the lighting pole determines the uniformity of illumination; it should be six to ten meters high - higher mounting heights are recommended for important urban roads. Additionally, lighting poles should have overhangs, which keep the poles away from pavement edges. The overhangs also provide better light distribution and reduce glare for road users.
Lighting can reduce glare and improve visibility. In addition, roadway lighting can provide additive contrast for objects. However, the effectiveness of color contrast is dependent on the color of the objects and the color rendering capabilities of the source. Moreover, the effect of color contrast is not quantified for road lighting. It is important to note that the effects of roadway lighting will not always be comparable to those achieved by other forms of illumination.
Road lighting can provide many benefits for cities. Besides improving safety, it can also enhance energy efficiency. In addition to reducing energy use, it can reduce the cost of electricity. Increasing energy efficiency is an important aspect of any road lighting project. However, it is important to ensure the quality of road lighting. Having good lighting will enhance safety and increase energy efficiency.
Road lighting should also provide adequate visual comfort for all road users. This has a positive impact on safety and the general feeling of security during the evening hours. Although road lighting has become an integral part of modern society, many countries do not utilize all of its potentials. This is because the applicable regulations specify the places and areas that should be illuminated at night.
The impact of road lighting on safety was studied by researchers in the UK. The study found that road lighting increases the perception of safety in urban areas. Researchers also found that pedestrians felt less threatened by crime when they have more visible lights.
NBDD-LED-600A Led Street Parking Lot Light
|
Number of LEDs
|
LED Current
|
Power Consumpt
|
Nominal Initial Flux*
|
|
64
|
530mA
|
100W
|
11500lm
|
|
700mA
|
140W
|
15400lm
|
|
1050mA
|
200W
|
20000lm
|
|
80
|
530mA
|
150W
|
16500lm
|
|
700mA
|
180W
|
19800lm
|
|
1050mA
|
250W
|
25000lm
|
|
96
|
530mA
|
150W
|
13500lm
|
|
700mA
|
200W
|
22000lm
|
|
112
|
530mA
|
180W
|
20700lm
|
|
700mA
|
250W
|
27500lm
|
